Best Plasma Cutter Under $1000 2022 [On Point]

There are a lot of products on the market, and it can be tough to figure out which one is the best for you. That is why we are here to help. In this blog post, we will recommend our favorite plasma cutter under $1000s. We believe youรขโ‚ฌ™ll find a quality product among the listed ones. So, without wasting any time, keep exploring!

10 Best Plasma Cutter Under $1000 Comparison:

Our 10 Best Plasma Cutter Under $1000 Picks:

As we have already shared with you a list of the top plasma cutter under $1000, you should be able to pick the right one for you pretty easily. However, if you are looking for detailed description of what each product does, read on as we go one by one in detail.

1. 50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual...

50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual...
  • ๐Ÿ›ก๏ธ Non-Touch Pilot Arc Plasma Cutterโ˜…: Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal.Efficiently Cuts Though Rough, Painted, And Rusty Surfaces. Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life
  • ๐Ÿ›ก๏ธ50 Amp OUTPUT โ˜…: Up To 50A Output Current Can Cut Up To 31/64 Inch (13.0mm) Plate. Equipped With Digital Display And Alarm LED, Read The Output Welding Current
  • ๐Ÿ›ก๏ธ PACKAGE INCLUDESโ˜…: Power Supply, Plasma Cutting Torch, Ground Clamp,Converter Power Cord, Pre-installed NPT 1/4โ€ Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.(As Picture)( Stainless Steel,Gas Tube, Hoop,Plasma Tips Nozzle Extended, Electrode- Extended,Shroud Ceramic Cup ,Gas Ring)
  • ๐Ÿ›ก๏ธPlasma Cutter Can Be Plugged Into 120V / 230V Dual Voltage Using(Automatic Fitting)

2. Pilot Arc Plasma Cutter, Non-touch, BTC500DP CUT50DP 50Amps...

Pilot Arc Plasma Cutter, Non-touch, BTC500DP CUT50DP 50Amps...
  • ใ€Pilot Arc Functionใ€‘This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
  • ใ€Dual-Voltage 110/220Vใ€‘Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
  • ใ€Air Pressure & Air Compressorใ€‘The regulator and gauge are installed in front of the panel๏ผŒyou can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.
  • ใ€Post Time Functionใ€‘With post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.
  • ใ€Cutting Thicknessใ€‘The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.

3. ZFE Quality Spacer Guide For Air Plasma Cutter Cutting...

ZFE Quality Spacer Guide For Air Plasma Cutter Cutting...
  • โ–ฒ100% Brand New with high quality. 5pcs Quality Spacer Guide For Air Plasma Cutter Cutting WSD-60P SG-55 AG-60
  • โ–ฒCan be used in high frequency contact 60A following up of air plasma arc cutting machine series products, high-frequency air plasma is suitable for various brands of 60A following cutting machine. The SG-55 cutting head cutting 18MM thick plate under the current of 60A. This Spacer Guide Suitable for Plasma Cutter WSD-60P SG-55 AG-60
  • โ–ฒIt has high grade material - stainless steel. It could service a long time and be protective when using.
  • โ–ฒThese torches for Plasma cutting machines such as ,CUT-60,CUT-60D, CT312,CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc.

4. P-80 Plasma Cutter Roller Guide Wheel Spacer circle compass...

P-80 Plasma Cutter Roller Guide Wheel Spacer circle compass...
  • fit P80 P-80 Panasonic Plasma Cutter torch
  • Roller Guide Wheel Spacer
  • Fit Pilot Arc Starting
  • inner diametre : 33mm
  • Max Cutting thickness: 40MM

5. Plasma Cutting PT-31 Roller Guide Wheel Spacer Stand-off for...

Plasma Cutting PT-31 Roller Guide Wheel Spacer Stand-off for...
  • Two wheels spacer roller guideโ€”โ€”The upgrade double wheel roller guide can fit PT-31 torch / LG40 torch, double wheel roller guide can help PLAXCON PT31 torch maintain balance during cutting
  • Applicable Plasma Torch modelโ€”โ€”The PT-31 Roller Guide can fit PT-31 / LG-40 plasma cutting torch which can work CUT-40, CUT-50, CUT-50D, LGK-40 plasma cutter machine
  • Can fit different types of PT31 torchโ€”โ€”The positioning screws on the Roller guide can help to follow and fix different types of PT31 plasma cutting torch
  • Wheel height can be adjustedโ€”โ€”The two wheels of the Roller guide can be adjusted in height, up to 1.81in / 46mm
  • PT-31 plasma cutting consumables, aftermarket part, not original; We provide free after-sales consulting services

6. LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual...

LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual...
  • โ˜… ๐๐จ๐ง-๐“๐จ๐ฎ๐œ๐ก ๐๐ข๐ฅ๐จ๐ญ ๐€๐ซ๐œ ๐๐ฅ๐š๐ฌ๐ฆ๐š ๐‚๐ฎ๐ญ๐ญ๐ž๐ซ: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • โ˜… ๐’๐š๐Ÿ๐ž & ๐š๐ญ ๐‹๐จ๐ฐ ๐‚๐จ๐ฌ๐ญ: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • โ˜… ๐’๐ž๐ญ๐ฎ๐ฉ ๐ฐ๐ข๐ญ๐ก๐ข๐ง ๐Ÿ ๐Œ๐ข๐ง๐ฎ๐ญ๐ž: The pre-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
  • โ˜… ๐Ž๐ฎ๐ญ๐ฉ๐ฎ๐ญ & ๐๐ž๐ซ๐Ÿ๐จ๐ซ๐ฆ๐š๐ง๐œ๐ž: 10-50A DC output, 1/2โ€ ideal clean cut and 3/4โ€ maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • โ˜… ๐๐ฎ๐ฒ ๐ฐ๐ข๐ญ๐ก ๐‚๐จ๐ง๐Ÿ๐ข๐๐ž๐ง๐œ๐ž: We offer a ๐Ÿ‘๐ŸŽ ๐๐š๐ฒ ๐ฆ๐จ๐ง๐ž๐ฒ-๐›๐š๐œ๐ค ๐ ๐ฎ๐š๐ซ๐š๐ง๐ญ๐ž๐ž, ๐š ๐Ÿ-๐ฒ๐ž๐š๐ซ ๐๐ž๐ฐ ๐‘๐ž๐ฉ๐ฅ๐š๐œ๐ž๐ฆ๐ž๐ง๐ญ ๐ฐ๐š๐ซ๐ซ๐š๐ง๐ญ๐ฒ ๐š๐ง๐ ๐ญ๐จ๐ญ๐š๐ฅ ๐Ÿ‘-๐˜๐ž๐š๐ซ ๐ฅ๐ข๐ฆ๐ข๐ญ๐ž๐ ๐ฐ๐š๐ซ๐ซ๐š๐ง๐ญ๐ฒ, please submit warranty registration form on our website. ๐Ž๐ฎ๐ซ ๐”๐’๐€-๐›๐š๐ฌ๐ž๐ customer service(via phone/email) is available to assist you.
  • โ˜… ๐๐š๐œ๐ค๐š๐ ๐ž ๐ˆ๐ง๐œ๐ฅ๐ฎ๐๐ž๐ฌ: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4โ€ industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • โ˜… ๐๐š๐ฉ๐ฌ๐ญ ๐€๐๐ฏ๐š๐ง๐œ๐ž๐ ๐‚๐จ๐จ๐ฅ๐ข๐ง๐  ๐’๐ฒ๐ฌ๐ญ๐ž๐ฆ: ensures the plasma cutter has a stable and durable high performance.โ˜… ๐ƒ๐ฎ๐š๐ฅ ๐•๐จ๐ฅ๐ญ๐š๐ ๐ž ๐ˆ๐ง๐ฉ๐ฎ๐ญ: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).

7. Jack&Dave 100 Pcs Plasma Cutting Consumables (Standard) Fit...

Jack&Dave 100 Pcs Plasma Cutting Consumables (Standard) Fit...
  • 100PCS Plasma cutting consumables Common
  • Package Include:10 Pcs Cup 30 Pcs Electrodes 20 Pcs Ring 40 Pcs Tip(Common)
  • Fits Stahlwerk CT312, CUT50, ACDC TIG200 PLASMA, CT520, CT512P with PT-31 GUN
  • Fit PT31-GUN
  • For 40 50 Amps Cutting Machine

8. RX WELD 52Pcs Plasma Cutter Torch Consumables Electrode...

RX WELD 52Pcs Plasma Cutter Torch Consumables Electrode...
  • Fit SG-55 AG-60 WSD-60 plasma cutter torch head.
  • Package include:2 Guide 10 Cup 20 Nozzles 20 Electrodes.
  • Suit for home DIY jobs and light duty small business projects.
  • Material:Metal+ceramics,100% brand new and high quality
  • This consumables can use with SG-55 AG-60 WSD-60 plasma cutting torch AG60 SG55 for ICUT60 CUT-60 LGK-60 CUT50P plasma cutting machines.

9. 24PCS SG-55 AG-60 WSD-60 Plasma Cutter Cutting Torch Tip...

24PCS SG-55 AG-60 WSD-60 Plasma Cutter Cutting Torch Tip...
  • plasma cutting Pilot Arc torch head set, SG-55, AG-60,WSD-60P plasma torch spacer guide
  • Color:Sliver+light purple
  • Material:Metal+ceramics
  • 100% brand new and high quality

10. Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC...

Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC...
  • ๐Ÿ›ก๏ธใ€High Qualityใ€‘Cut-50 50AMP Plasma Cutter Is Made Of High Quality Components, By Adopting The Most Advanced Inverter Technical Of Switch Power, As Well As The Product Life And Work Efficiency Are Increased By 30% Than Ordinary Machines, Smooth Cutting Surface,Permanent Supply Of High Auality Consumables
  • ๐Ÿ›ก๏ธใ€Portable Designใ€‘ Compact Plasma Cutting Machine With LCD Digital Display And Equipped With A Portable Handle๏ผŒIt Is Very Convenient To Operate And Carry.Long Term Supply Of Consumables
  • ๐Ÿ›ก๏ธใ€Dual Voltageใ€‘This Plasma Cutter Can Automatically Adapt To Switch Input Power Of 90V-260V(110V/220V), Plug And Play In Different Environments, No External Conversion Plug Required
  • ๐Ÿ›ก๏ธใ€Applicationใ€‘This Is A Professional Plasma Cutter, Which Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials, Cutting Thickness Is 1-20mm

How to Decide on the Best Plasma Cutter Under $1000?

Before you can buy plasma cutter under $1000s, there are a few things that you need to know. We have compiled a buying guide for plasma cutter under $1000 products to help make the process easier and less daunting. This is our comprehensive list of what we believe are the most important factors in buying plasma cutter under $1000 products:

Brand Value

plasma cutter under $1000s are designed to ensure the highest quality of life, but with this comes higher prices.

When deciding on a plasma cutter under $1000 you should determine how much value it will bring into your life and how often (and for what reasons) you are likely to use it.

If it is something that will be used frequently then perhaps spending a little extra for a good brand product is worth it, but if you are only going to use the plasma cutter under $1000 a few times then products that are not from the popular brands can be picked.

Premium Materials

plasma cutter under $1000s are usually made from some of the highest quality materials available on todays market. However, there are some low-quality products as well.

If you want a plasma cutter under $1000 that will stand out and be noticed, then perhaps it is worth paying extra to get something truly special! If not, go for a balanced product that compromises both quality and prices.

Quality Construction

You should look for a product that is designed to last. It needs to function well repeatedly over long periods of time so the design must be durable enough to withstand heavy use and maintain its form. This comes at a cost, but it is worth remembering that plasma cutter under $1000s are usually made to last – they are built to be used over the course of a long time!

Reasonably Priced

plasma cutter under $1000s are not always the cheapest, but they can offer great value for money.

It is important to find a plasma cutter under $1000 that meets your specific needs and falls within your budget. Remember, you do not have to break the bank to get a good product – there are many affordable options available!

Good Aftersales Service

You should also look for a product that comes with good aftersales service. This means you can easily get replacements, repairs, and refunds if your plasma cutter under $1000 does not work well or stops working properly!

When purchasing online it is worth reading the terms of sale thoroughly to ensure this is possible before buying anything.

Universal Usage

Some plasma cutter under $1000s can be used for multiple purposes. If you are looking to buy something that will see a lot of use, then it might be best to get one that is up-and-coming in the market rather than getting an older model on sale!

Summing Up

To conclude, you should choose a product that has all of the qualities that are important to you. Nowadays it is easy to find everything online and most descriptions will tell you exactly what is included in your purchase and what the best features of the items are. With these tips in mind, you will be able to choose the product that best suits your needs.

Last update on 2022-06-02 / Affiliate links / Images from Amazon Product Advertising API