10 Best Plasma Cutter Under 500 Compared 2022

Do you want to get the best plasma cutter under 500 without spending lots of time and money? Of course, who does not! Here is where this blog post comes in handy. You will be shown how to shop for the best products quickly and easily so that you do not have to waste time or money on anything less than perfect.

Top Rated Plasma Cutter Under 500:

Our 10 Best Plasma Cutter Under 500 Picks:

As we have already shared with you a list of the top plasma cutter under 500, you should be able to pick the right one for you pretty easily. However, if you are looking for detailed description of what each product does, read on as we go one by one in detail.

1. 50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual...

50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual...
  • ๐Ÿ›ก๏ธ Non-Touch Pilot Arc Plasma Cutterโ˜…: Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal.Efficiently Cuts Though Rough, Painted, And Rusty Surfaces. Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life
  • ๐Ÿ›ก๏ธ50 Amp OUTPUT โ˜…: Up To 50A Output Current Can Cut Up To 31/64 Inch (13.0mm) Plate. Equipped With Digital Display And Alarm LED, Read The Output Welding Current
  • ๐Ÿ›ก๏ธ PACKAGE INCLUDESโ˜…: Power Supply, Plasma Cutting Torch, Ground Clamp,Converter Power Cord, Pre-installed NPT 1/4โ€ Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.(As Picture)( Stainless Steel,Gas Tube, Hoop,Plasma Tips Nozzle Extended, Electrode- Extended,Shroud Ceramic Cup ,Gas Ring)
  • ๐Ÿ›ก๏ธPlasma Cutter Can Be Plugged Into 120V / 230V Dual Voltage Using(Automatic Fitting)

2. Pilot Arc Plasma Cutter, Non-touch, BTC500DP CUT50DP 50Amps...

Pilot Arc Plasma Cutter, Non-touch, BTC500DP CUT50DP 50Amps...
  • ใ€Pilot Arc Functionใ€‘This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
  • ใ€Dual-Voltage 110/220Vใ€‘Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
  • ใ€Air Pressure & Air Compressorใ€‘The regulator and gauge are installed in front of the panel๏ผŒyou can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.
  • ใ€Post Time Functionใ€‘With post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.
  • ใ€Cutting Thicknessใ€‘The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.

3. ZFE Quality Spacer Guide For Air Plasma Cutter Cutting...

ZFE Quality Spacer Guide For Air Plasma Cutter Cutting...
  • โ–ฒ100% Brand New with high quality. 5pcs Quality Spacer Guide For Air Plasma Cutter Cutting WSD-60P SG-55 AG-60
  • โ–ฒCan be used in high frequency contact 60A following up of air plasma arc cutting machine series products, high-frequency air plasma is suitable for various brands of 60A following cutting machine. The SG-55 cutting head cutting 18MM thick plate under the current of 60A. This Spacer Guide Suitable for Plasma Cutter WSD-60P SG-55 AG-60
  • โ–ฒIt has high grade material - stainless steel. It could service a long time and be protective when using.
  • โ–ฒThese torches for Plasma cutting machines such as ,CUT-60,CUT-60D, CT312,CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc.

4. P-80 Plasma Cutter Roller Guide Wheel Spacer circle compass...

P-80 Plasma Cutter Roller Guide Wheel Spacer circle compass...
  • fit P80 P-80 Panasonic Plasma Cutter torch
  • Roller Guide Wheel Spacer
  • Fit Pilot Arc Starting
  • inner diametre : 33mm
  • Max Cutting thickness: 40MM

5. Jack&Dave 100 Pcs Plasma Cutting Consumables (Standard) Fit...

Jack&Dave 100 Pcs Plasma Cutting Consumables (Standard) Fit...
  • 100PCS Plasma cutting consumables Common
  • Package Include:10 Pcs Cup 30 Pcs Electrodes 20 Pcs Ring 40 Pcs Tip(Common)
  • Fits Stahlwerk CT312, CUT50, ACDC TIG200 PLASMA, CT520, CT512P with PT-31 GUN
  • Fit PT31-GUN
  • For 40 50 Amps Cutting Machine

6. RX WELD 52Pcs Plasma Cutter Torch Consumables Electrode...

RX WELD 52Pcs Plasma Cutter Torch Consumables Electrode...
  • Fit SG-55 AG-60 WSD-60 plasma cutter torch head.
  • Package include:2 Guide 10 Cup 20 Nozzles 20 Electrodes.
  • Suit for home DIY jobs and light duty small business projects.
  • Material:Metal+ceramics,100% brand new and high quality
  • This consumables can use with SG-55 AG-60 WSD-60 plasma cutting torch AG60 SG55 for ICUT60 CUT-60 LGK-60 CUT50P plasma cutting machines.

7. Plasma Cutting PT-31 Roller Guide Wheel Spacer Stand-off for...

Plasma Cutting PT-31 Roller Guide Wheel Spacer Stand-off for...
  • Two wheels spacer roller guideโ€”โ€”The upgrade double wheel roller guide can fit PT-31 torch / LG40 torch, double wheel roller guide can help PLAXCON PT31 torch maintain balance during cutting
  • Applicable Plasma Torch modelโ€”โ€”The PT-31 Roller Guide can fit PT-31 / LG-40 plasma cutting torch which can work CUT-40, CUT-50, CUT-50D, LGK-40 plasma cutter machine
  • Can fit different types of PT31 torchโ€”โ€”The positioning screws on the Roller guide can help to follow and fix different types of PT31 plasma cutting torch
  • Wheel height can be adjustedโ€”โ€”The two wheels of the Roller guide can be adjusted in height, up to 1.81in / 46mm
  • PT-31 plasma cutting consumables, aftermarket part, not original; We provide free after-sales consulting services

8. LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual...

LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual...
  • โ˜… ๐๐จ๐ง-๐“๐จ๐ฎ๐œ๐ก ๐๐ข๐ฅ๐จ๐ญ ๐€๐ซ๐œ ๐๐ฅ๐š๐ฌ๐ฆ๐š ๐‚๐ฎ๐ญ๐ญ๐ž๐ซ: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • โ˜… ๐’๐š๐Ÿ๐ž & ๐š๐ญ ๐‹๐จ๐ฐ ๐‚๐จ๐ฌ๐ญ: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • โ˜… ๐’๐ž๐ญ๐ฎ๐ฉ ๐ฐ๐ข๐ญ๐ก๐ข๐ง ๐Ÿ ๐Œ๐ข๐ง๐ฎ๐ญ๐ž: The pre-installed NPT 1/4โ€ industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
  • โ˜… ๐Ž๐ฎ๐ญ๐ฉ๐ฎ๐ญ & ๐๐ž๐ซ๐Ÿ๐จ๐ซ๐ฆ๐š๐ง๐œ๐ž: 10-50A DC output, 1/2โ€ ideal clean cut and 3/4โ€ maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • โ˜… ๐๐ฎ๐ฒ ๐ฐ๐ข๐ญ๐ก ๐‚๐จ๐ง๐Ÿ๐ข๐๐ž๐ง๐œ๐ž: We offer a ๐Ÿ‘๐ŸŽ ๐๐š๐ฒ ๐ฆ๐จ๐ง๐ž๐ฒ-๐›๐š๐œ๐ค ๐ ๐ฎ๐š๐ซ๐š๐ง๐ญ๐ž๐ž, ๐š ๐Ÿ-๐ฒ๐ž๐š๐ซ ๐๐ž๐ฐ ๐‘๐ž๐ฉ๐ฅ๐š๐œ๐ž๐ฆ๐ž๐ง๐ญ ๐ฐ๐š๐ซ๐ซ๐š๐ง๐ญ๐ฒ ๐š๐ง๐ ๐ญ๐จ๐ญ๐š๐ฅ ๐Ÿ‘-๐˜๐ž๐š๐ซ ๐ฅ๐ข๐ฆ๐ข๐ญ๐ž๐ ๐ฐ๐š๐ซ๐ซ๐š๐ง๐ญ๐ฒ, please submit warranty registration form on our website. ๐Ž๐ฎ๐ซ ๐”๐’๐€-๐›๐š๐ฌ๐ž๐ customer service(via phone/email) is available to assist you.
  • โ˜… ๐๐š๐œ๐ค๐š๐ ๐ž ๐ˆ๐ง๐œ๐ฅ๐ฎ๐๐ž๐ฌ: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4โ€ industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
  • โ˜… ๐๐š๐ฉ๐ฌ๐ญ ๐€๐๐ฏ๐š๐ง๐œ๐ž๐ ๐‚๐จ๐จ๐ฅ๐ข๐ง๐  ๐’๐ฒ๐ฌ๐ญ๐ž๐ฆ: ensures the plasma cutter has a stable and durable high performance.โ˜… ๐ƒ๐ฎ๐š๐ฅ ๐•๐จ๐ฅ๐ญ๐š๐ ๐ž ๐ˆ๐ง๐ฉ๐ฎ๐ญ: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).

9. Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC...

Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC...
  • ๐Ÿ›ก๏ธใ€High Qualityใ€‘Cut-50 50AMP Plasma Cutter Is Made Of High Quality Components, By Adopting The Most Advanced Inverter Technical Of Switch Power, As Well As The Product Life And Work Efficiency Are Increased By 30% Than Ordinary Machines, Smooth Cutting Surface,Permanent Supply Of High Auality Consumables
  • ๐Ÿ›ก๏ธใ€Portable Designใ€‘ Compact Plasma Cutting Machine With LCD Digital Display And Equipped With A Portable Handle๏ผŒIt Is Very Convenient To Operate And Carry.Long Term Supply Of Consumables
  • ๐Ÿ›ก๏ธใ€Dual Voltageใ€‘This Plasma Cutter Can Automatically Adapt To Switch Input Power Of 90V-260V(110V/220V), Plug And Play In Different Environments, No External Conversion Plug Required
  • ๐Ÿ›ก๏ธใ€Applicationใ€‘This Is A Professional Plasma Cutter, Which Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials, Cutting Thickness Is 1-20mm

10. Plasma Cutter, Max Cutting Thickness 20MM, 50A Inverter DC...

Plasma Cutter, Max Cutting Thickness 20MM, 50A Inverter DC...
  • ๐Ÿ””โ˜…Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper,And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life.
  • ๐Ÿ””โ˜…50 Amp 85%-100% Digital Inverter Air Plasma Cutter,Smart Wide Voltage 90~260V, 50/60Hz(With Converter Power Cord) 20-50A AC- DC Output, 1/2โ€ Ideal Clean Cut And 3/4โ€ Maximum Severance Cut Under 220/240V. 20-50A DC Output, 1/3" Ideal Clean Cut And 2/5" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-hazardous Compressed Air To Cut, Safe And At Low Cost.
  • ๐Ÿ””โ˜…Package Includes:1 x Plasma Cutter (Fixed 220V Power Plug) 1 x 4M S7 Universally Cutting Torch 1 x High-Quality Air Regulator 1 x 240V To 120V Power Plug Adaptor Conversion Cord 1 x Earth Clamp 20PCSx Plasma Cutting Consumables Common 1 x Manual
  • ๐Ÿ””โ˜…Automatic Dual Voltage / Dual Frequency (110/230 V 50/60Hz).Long Term Supply Of Consumables On S7 Shop.
  • ๐Ÿ””โ˜… HOLA,Buy With Confidence: We Offer 3-years Warranty, Please Submit Registration Form on Our Website.

Best Plasma Cutter Under 500 Buyers Guide

As a buyer, you want to be confident that the products you purchase are of good quality and worth the price. In this buying guide, we will provide tips on how to make informed decisions when shopping for plasma cutter under 500s. From product research to price comparisons, we will cover it all!

Build Material

The build material of a product is one of the most important factors to consider when making your purchase. plasma cutter under 500 offers a variety of materials for you to choose from, each with its own set of pros and cons. So, make sure you choose the right one according to your preference and budget.

Comfortable working with

plasma cutter under 500 products are quite easy to work with. Still, you need to check whether the model you choose is comfortable to work with or not. Some of the common factors that determine ease of use are size, weight, and grip.

Value For Money

It is important to make sure that you get the most value for money. While some of the products are more expensive than others, they all have a good Value For Money Ratio (VFR). This VFR indicates how well each product performs in comparison with its price tag.

Long-Lasting

You will have to invest in a product that can last for long so you do not need to buy another one soon. Furthermore, if it can be used by more than one person or purpose, then that would add even more value for your money.

Aesthetics and Design

While these are completely subjective factors, some people might appreciate the aesthetics and design of a product. For example, the color might appeal to them or they might be attracted by its sleek look and feel.

Decide on your budget before you make your purchase because the pricing may vary depending on the factors described above. Furthermore, it is also important for you to check out whether one plasma cutter under 500 model is compatible with another. This compatibility will help you save money in the long run and make your work easier.

Benefits of Buying plasma cutter under 500 on Amazon

Legit Sellers

When you buy a product from an authorized seller, you can be sure that the product is genuine and has not been tampered with.

Ease of Buying

It is extremely easy to buy a product on Amazon. You can either look for the product directly on their website or you could use Amazon search bar which is at the top of every page.

Just Click and Buy

Amazon makes it easy to purchase products from its site because all you have to do is just do a few clicks and input payment details to have the product delivered at your doorstep within a few days.

Great Return Policy

If you are not happy with the product that you have bought, Amazon offers an easy and hassle-free return policy. So, you are covered in case you do not like the product or a damaged product is delivered to you.

Low Cost

Amazon offers products at very affordable and reasonable prices. There is a huge price range to choose from depending on the budget you have and what exactly you are looking for in a product.

Delivered on the Doorstep

Amazon has streamlined the online shopping experience by delivering products directly to your doorstep. This makes it easy for you because now you do not have to worry about going to a store and carrying heavy items back home. Just place an order using your computer or mobile phone, wait for a few days, and voila! You will receive the product right on your doorstep.

Ending Remarks

So, what is the verdict? It really depends on your needs. If you are looking for a product that will last and be comfortable with good warranty coverage, then we recommend the #1 pick of the best best plasma cutter under 500 buying guide. While this might not look as stylish or versatile as other products in the same price range, it should suit your needs if durability is important to you.

Last update on 2022-06-02 / Affiliate links / Images from Amazon Product Advertising API