Best Red Dot For Hellcat Reviews Of 2022 [Top Picks]

Are you looking for the best red dot for hellcat? Look no further! We have done the research and gathered all the information you need to make an informed decision. In this blog post, we will outline the top products so that you can choose the one that is right for you. We also invite you to share your own experiences with these products in the comments section below.

The 10 Most Recommended Red Dot For Hellcats:

Our 10 Best Red Dot For Hellcat Picks:

As we have already shared with you a list of the top red dot for hellcat, you should be able to pick the right one for you pretty easily. However, if you are looking for detailed description of what each product does, read on as we go one by one in detail.

1. Ade Advanced Optics RD3-018-SC Spike Micro Red Dot Sight for...

Ade Advanced Optics RD3-018-SC Spike Micro Red Dot Sight for...
  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
  • ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
  • 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6" x (Width).92" x (Height).93"
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
  • Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
  • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.

2. Sig Sauer SOR01300 Romeo Zero Reflex Sight, 3 MOA Red Dot,...

Sig Sauer SOR01300 Romeo Zero Reflex Sight, 3 MOA Red Dot,...
  • Spectra coat HD polymer lens with 10 times the impact resistance over traditional glass lenses
  • ROMEOZero is Compatible With: - Direct mount to ROMEOZero - Shield RMS-c footprint - J-Point footprint.
  • Stippling pattern on the housing matches p365 and p365xl grip pattern, for an integrated look
  • 8 vivid, user-configurable daytime illumination levels
  • SIG Sauer assumes no liability if a user attempts to mount a ROMEOZero to a Springfield Hellcat pistol slide.
  • Please note: this product is not compatible with slides cut to accept a standard ROMEO1.

3. Ade Advanced Optics Spike (RD3-018) Ultra Micro Red Dot...

Ade Advanced Optics Spike (RD3-018) Ultra Micro Red Dot...
  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
  • ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
  • 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6" x (Width).92" x (Height).93"
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
  • Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
  • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.

4. Vortex Optics Venom Red Dot Sight - 3 MOA Dot Hat

Vortex Optics Venom Red Dot Sight - 3 MOA Dot Hat
  • The Venom Red Dot Sight-3 MOA promotes rapid target acquistion while providing a precise point of aim; getting shots down range and on target fast. The Venom's aluminum housing ensures this unit will stand up to whatever you throw at it.
  • High quality, fully multi-coated lens offers a clean, wide field of view. Power and dot intensity controls are conveniently located on the left side of the sight to choose between 10 brightness levels.
  • The Venom also has an auto-brightness mode that uses an ambient light sensor to control dot intensity if the shooter prefers.
  • 1 MOA windage and elevation adjustments are super sleek and make sighting in a breeze. The top load system makes chaging the CR1632 battery a breeze, as you will not have to remove your sight to change the power source.
  • Venom Red Dot will fit well on your rifle or shotgun giving you optimal flexibility. Vortex Optics hat included, hat color may vary.

5. Ade Advanced Optics Spike Micro Red Dot Sight for RMS/RMSC...

Ade Advanced Optics Spike Micro Red Dot Sight for RMS/RMSC...
  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
  • ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
  • 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6" x (Width).92" x (Height).93"
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
  • Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
  • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.

6. Ade Advanced Optics NUWA (RD3-021) Ultra Micro Red Dot Sight...

Ade Advanced Optics NUWA (RD3-021) Ultra Micro Red Dot Sight...
  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
  • ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting. 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5" x (Width)..88" x (Height).89"
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
  • Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
  • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.
  • ADE Nuwa is manual activated by pressing the on/off switch. Press and Hold switch for 2 seconds to turn on/off, quick press to adjust the brightness from low to high.

7. Ade Advanced Optics RD3-021-2MOA NUWA Micro Red Dot Sight...

Ade Advanced Optics RD3-021-2MOA NUWA Micro Red Dot Sight...
  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
  • ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.
  • 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5" x (Width)..88" x (Height).89"
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
  • Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
  • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.

8. alignment plus Viridian Essential Red Laser Sight for...

alignment plus Viridian Essential Red Laser Sight for...
  • RED LASER: This compact red tactical laser sight utilizes a precise advanced 650nm wave length to generate the brightest, sharpest and visible red targeting dot. Track your target quicker and more accurately.
  • ACTIVATION: Simple ambidextrous buttons activate the world's most visible red dot laser.
  • LASER RANGE: The red dot laser is visible up to 1 miles at night and up to 25 yards in daylight. Class 3R Laser Product (Does not exceed Class IIIA emission limits), ≤ 5mW power output
  • BATTERY LIFE: Up to 6 hours of constant red laser time. Includes 5 min auto shut off feature.
  • CONSTRUCTION: Built specifically for your firearm from high strength thermo molded polymer, this tactical red laser is only .78 oz. including the battery! Virtually Weightless! Proudly designed and built in the USA

9. Star Vixen womens Petite 3/4 Sleeve Peasant Top With Keyhole...

Star Vixen womens Petite 3/4 Sleeve Peasant Top With Keyhole...
  • Soft Silky knit fabric, 92% Polyester 8% Spandex
  • Features 3/4 sleeve and elastic hem
  • Flattering peasant style top with key hole detail
  • Work-ready and effortlessly chic, perfect for everyday
  • Easy wear and care, pull on style in wrinkle resistant fabric

10. Swampfox Justice - Micro Reflex Red Dot Sights (RMR Pistol...

Swampfox Justice - Micro Reflex Red Dot Sights (RMR Pistol...
  • [GIVE ME LIBERTY!] The 22mm wide window makes Liberty about the same width as a double-stack 9mm Pistol slide. Liberty is a bit easier to conceal than its bigger brother Justice. Liberty is narrower with flush fitting brightness buttons on the left and a top-loading CR1632. Liberty’s emitter section is also lower profile, allowing iron sights of .365” or higher to co-witness.
  • [JUSTICE FOR ALL!] Justice is identical to Liberty except for its larger window, measuring 27mm wide. Justice is great for shotguns, carbines, duty or competition pistols where concealing is not important and even faster sight acquisition is desired. Liberty and Justice share the same RMR footprint, and body dimensions underneath the window. In all respects other than window size, Liberty and Justice are identical, and both are fully compatible with standard ALS law enforcement holsters.
  • [SEEING RED AGAIN!] Liberty and Justice feature high battery life emitters, available as 3 MOA red dot reticles. Other companies claim impressive battery life figures, but those numbers aren’t true at the daylight bright settings used for everyday carry. Liberty and Justice get about 4,000 hours battery life at daylight brightness. Coupled with Shake ‘N Wake illumination, we estimate once a year battery changes.
  • [BUILT FOR RETENTION HOLSTERS!] Compatibility issues can be a major headache when adopting a new piece of equipment, but you don’t have to worry. There is no need to go holster hunting or invest in an expensive custom holster setup. Liberty and Justice fit securely in all ALS series duty holsters, both optic and holster fully function as intended.
  • [SHAKE IT, BABY!] Liberty and Justice feature Shake ‘N Wake motion sensing illumination tech to help save battery life. After four minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting. This allows daily carry without wasting battery life.

Best Red Dot For Hellcat Buyers Guide

There are a lot of things to consider when you are buying a product. What is the quality of the product? How does it compare to similar products on the market? Is it affordable? These are just some of the questions you need to answer before making a purchase. In this buyers guide, we will walk you through everything you need to know about red dot for hellcat so that you can make an informed decision before buying.

Brand Considerations

When it comes to selecting a product, the first thing you should consider is the brand. Some brands are more dependable than others, and some have just that wow factor present while some do not. You should research several brands and compare their ratings in order to come to a conclusion.

red dot for hellcat Price

The next thing you should consider when choosing a product is the price. Although prices will vary between different products, some are more expensive than others. You need to determine which features matter most and if they are worth the extra money. For example, if you want a red dot for hellcat, make sure it will serve the purpose perfectly without costing more than usual.

What is Included?

Some products come with additional items that can be useful, but some do not. You should make sure that the product you choose comes with everything it needs to be fully functional, such as batteries and chargers. Moreover, if some items are missing, you may need to go out and buy them separately. If you want all of the necessary components included in your purchase, read the list of materials carefully or ask around about what is included before making your choice.

Customer Ratings

When you are trying to determine the best product, it is important to read what customers have to say about it. Feedback can be helpful because it contains details that manufacturer websites or guides often leave out. Reading through customer ratings and reviews will allow you to get into their heads and learn how they really feel about their experience with the product.

Complexity

If you are new to using a red dot for hellcat, it is best to choose something simple and straightforward if possible. Complex products can be intimidating to use at first, however, they are often more advanced than some simpler devices.

If you do not want anything too difficult for the first time around, consider choosing a simple red dot for hellcat.

Durability

Similarly, it is a good idea to choose a product that is durable. A high-quality red dot for hellcat will be able to take a bit of wear and tear without breaking down or being damaged in any way. If you want something that can last for a long time with regular use, look into the materials used in the design process and consider their durability and sturdiness.

Make sure the product is ultimately what you are looking for and that its features are exactly what you need before you pay for it.

Ease of Use

Lastly, when selecting a red dot for hellcat, you should consider how easy it is to use. A lot of people do not want to struggle with adjusting settings and understanding directions, so it is important for your product to be user-friendly. Ensure the features work properly and that they are easy to figure out on your own before buying.

Just because you are browsing through plenty of products does not mean you have to settle on the one that is just ok. There are many options, but they are all different. Make sure the product is ultimately what you are looking for and that its features are exactly what you need before you pay for it.

Maintenance

All red dot for hellcats require some level of maintenance. However, the frequency is still something to think about before you purchase. If you are someone who can not be bothered to deal with these kinds of things, look into which products are low-maintenance or completely maintenance-free.

Ending Words

Durability, longevity, and price are the most important factors in purchasing a new product. I hope this guide helped you to make an informed decision on what best red dot for hellcat is right for your needs.

Last update on 2022-06-02 / Affiliate links / Images from Amazon Product Advertising API